Elevator calling board to set the address,no need to remove the LOP
Shenyang bluelight elevator LOP installed . No need to remove the LOP.The calling board can capture the address automatically.
The method is as follows:1.When the elevator is in driver state ,you can choose any botton as the reset button, another is set as the action is invalid.
2.Press the up button or the down button 5 times in 10 seconds ,press the button again, for 5 seconds to enter the hall setting state.
3.After entering the hall setting state,the direction display area flashes,the landing display area displays the current floor address value,and the current floor address value=the current floor number of the motherboard+1
4.Press the setting button 3 times in 10 seconds, then press the setting button and hold it for 5 seconds. save the current address value,the address value flashes three times and the calling board enters the normal working state.
